Full Dip Camo Tan 4 litre Matte Sprayable

Full Dip Camo Tan 4 litre Matte Sprayable Can change the colour of your Car, motorbike, alloy wheels, badges, emblems, grilles and interior Trim.
Use around the Home or Garden, arts & crafts. You can full dip almost anything.

Sprayable Removable Paint

4 Litres of Sprayable Removable Paint, No thinning required,Ready to use in our spray guns or yours, just mix-pour-spray.

Full Dip Camo matte colour range

Typical camouflage style, Full Dip camo offers four colours with a matte finish in the Military range. The combination of all four colours and you can create lovely camo patterns. Can be used independently, or playing with the mix of colours; Tan, Green and Brown and Black.
Will wrap, protect and change the colour of your project with a matte finish. You can add glossifier, metalizer or high gloss top coat if desired.
It can be removed by peeling it, as if it were a conventional vinyl.
Long research and development process from pioneers in the liquid vinyl spray for quality products.

Properties

Full Dip is recommended by us at FULL DIP IRELAND as the best Plasti Dip alternative we know of.
Pre thinned and ready to spray with spray gun.
Low VOC-REACH compliant

Full dip camo tan 4 litre covers, protects and colour changes easy. Sprays on super smooth.

Wraps, protects and changes colour with matte finish. It can be removed by peeling it, just like PlastiDip®.
For the correct application use either an Earlex or conventional compressor setup spray gun.

NEW Formulation, with professional Auto Levelling Additives for a perfect smooth finish.
Non-Oxidation additives – stays peelable for more than 10 years!!

Manufactured in Europe (Spain)
Air dried, flexible, liquid coating for use on almost anything
Liquid Vinyl spray application, once dry becomes a tough elastic and durable film.
It can be easily removed from most surfaces if required,Plastic,glass and metal.
You will need an average of 4-6 coats. Add more layers for greater protection. Sprayable Liquid Wrap in a Can.

How much full dip do I need to spray my car.

Depends on the size and the base colour, but we can generalise / estimate as follows:
Small size cars two tins
Medium size cars three or four tins based on size (usually 3)
Large cars four or five tins.
This dose not include a top coat that you may want to apply like an enhancer to change the final look ( Gloss or Metalizer ).

You can clean Full dip with most soaps, and it will resist water, mud or pressure water cleaning.
No cracks or self peeling over time, remains flexible and stretchy, and will not become brittle or crack.

Before Application

1. SURFACE PREPARATION
Before you start spraying the liquid vinyl, you need to have the surface completely clean, dry and free of any substance that may be capable of causing non grip (as waxes, cleaners etc). It is advisable to ensure that the surface is clean as possible without dirt (such as sand , dust, road tar, brake dust etc.) Full Dip® will bond to the surface you spray it on, and thus, if the surface is not 100% clean, you will get imperfections and faults.
So it is important you clean properly (even those annoying parts and between spokes on wheels). Cleaned perfectly and you will get uniform even finish that lasts years.

1.2 TOLERANCE TEST
Full Dip® can be applied to any surface such as metals, plastics, glass, wood, etc.. However it may best to do a small pre-test on an insignificant part of your project before committing to the full project to make sure it is 100% compatible to what you are spraying over with no adverse reaction.

Instructions for spraying full dip 4 litre matte sprayable, please go to our application Guide.