Full Dip Clear Matte 4 litre Sprayable

Full Dip Clear Matte 4 litre Sprayable can be used for :
A matte clear top coat on full dip, clear bra, spoiler or paint protection on your car. Use it over standard OEM paint and it will give it a matte finish.
I have used it on rear van glass to give a frosted privacy look and still let plenty of light in. Just apply on inside of glass to avoid unwanted removal.

4 Litre Sprayable application
Recommended guns;
FD650
MS3000
Compressor setup and 1.7 tip @ 20-28 PSI

Full Dip Clear Matte 4 litre Sprayable can also be used for :
Make your own Pigment Kit to Full Dip 4 Litre clear to make unique colors. Access category “pigments” to see all the colors and finishes available.

Mix the contents of each Pigment Kit with 4 liters of Full Dip clear to make your own full dip Matte, Metallic, Candy, Pearls or Chameleon colours.

Although the finish is matte you can always give extra shine if you apply full dip glossifier or high gloss as top coat.
Use around the Home or Garden, arts & crafts. You can full dip almost anything.
protect your project from moisture and corrosion. Its airtight and waterproof.
Use clear on its own to protect parts of you car from stone chips on your paint work.

Sprayable Removable Paint

4 Litres of Sprayable Removable Paint, No thinning required,Ready to use in our spray guns or yours, just mix-pour-spray.

Full Dip matte colour range

We have over 15 colours in full dip matte 4 litre sprayable and You can add glossifier, metalizer or high gloss top coat if desired.

Mix Your Own Colours

Buy Full Dip 4 litre clear ready to spray and add our pigments or tints to make your own amazing colours.
You can use any of our tint’s or pigments in Full Dip Clear Sprayable.
Tints : use 1 per 4 litre clear sprayable full dip
Pigments : use 1 x 70gr bag per clear 4 litre sprayable full dip tin.

Properties

Full Dip clear matte 4 litre is recommended by us at FULL DIP IRELAND as the best Plasti Dip alternative we know of.
Pre thinned and ready to spray with spray gun.
Low VOC-REACH compliant
It can be removed by peeling it, just like Plasti Dip®.
For the correct application use either an Earlex or conventional compressor setup spray gun.

NEW Formulation, with professional Auto Levelling Additives for a perfect smooth finish.
Non-Oxidation additives – stays peelable for more than 10 years!!
Liquid vinyl removable spray paint. wrap, protect and change the colour of your project with full dip.

Air dried, flexible, liquid vinyl coating for use on almost anything.
Once dry becomes a tough elastic,waterproof and durable film.
It can be easily removed from most surfaces if required,Plastic,glass and metal.
You will need an average of 4-6 coats. Add more layers for greater protection. Ready to spray Liquid Vinyl Wrap in a 4 Litre Can.

How much full dip do I need to spray my car.

Depends on the size and the base colour, but we can generalise / estimate as follows:
Small size cars two tins
Medium size cars three or four tins based on size (usually 3)
Large cars four or five tins.
This dose not include a top coat that you may want to apply like an enhancer to change the final look ( Gloss or Metalizer ).

You can clean Full dip with most soaps, and it will resist water, mud or pressure water cleaning.
No cracks or self peeling over time, remains flexible and stretchy, and will not become brittle or crack.

Before Application

1. SURFACE PREPARATION
Before you start spraying the liquid vinyl, you need to have the surface completely clean, dry and free of any substance that may be capable of causing non grip (as waxes, cleaners etc). It is advisable to ensure that the surface is clean as possible without dirt (such as sand , dust, road tar, brake dust etc.) Full Dip® will bond to the surface you spray it on, and thus, if the surface is not 100% clean, you will get imperfections and faults.
So it is important you clean properly (even those annoying parts and between spokes on wheels). Cleaned perfectly and you will get uniform even finish that lasts years.

1.2 TOLERANCE TEST
Full Dip® can be applied to any surface such as metals, plastics, glass, wood, etc.. However it may best to do a small pre-test on an insignificant part of your project before committing to the full project to make sure it is 100% compatible to what you are spraying over with no adverse reaction.

Instructions for spraying full dip Clear matte 4 litre sprayable, please go to our application Guide.